Electrical Panel Repair & Replacement in Joshua, TX

Your electrical panel is the single point where utility power enters your home and gets divided into the circuits that run everything inside it. Every breaker in that panel is a safety device — its job is to trip and cut power the moment a circuit is overloaded or a fault occurs. When the panel itself is damaged, overloaded, corroded, or simply past its service life, those breakers can't do that job reliably. That's when repair or replacement stops being an upgrade and becomes a safety decision.

Inland-Marine Electrical Services handles the full range of panel work across our North Texas service area: replacing a single faulty breaker, repairing a damaged or corroded panel, doing a full panel replacement, and adding whole-house surge protection. Jim approaches every panel the same way — open it, inspect it, tell you exactly what he sees, and quote the fix before any work starts. No upsell, no scare tactics, just a straight read on what your panel needs.

Panel replacement is one of the most common jobs we do for older homes in Joshua, Cleburne, Burleson, and the surrounding towns. A panel that served a 1960s or 1970s household fine for decades often can't keep up with today's loads — and in some cases the equipment itself has known, widely reported concerns that are worth having a professional inspect.

Call us if you notice any of these:

• Breakers that trip frequently or won't stay reset.
• A panel that feels warm to the touch, buzzes, or hums.
• Scorch marks, melting, or a burning smell near the panel.
• Rust or corrosion on the panel enclosure or the bus.
• Breakers that are physically damaged or won't physically move.
• A panel that still uses fuses instead of breakers.
• You're adding load — an EV charger, an addition, a shop — and the panel is full.

About certain older panel brands. Some panel brands found in homes built roughly from the 1950s through the 1980s — such as Federal Pacific Stab-Lok and Zinsco — have widely reported safety concerns documented by inspectors and electricians over many years. We won't tell you a panel will fail, because no one can know that about a specific unit without inspecting it. What we will tell you, honestly, is that if your home has one of these panels it is worth having a licensed electrician look at it. If you're unsure what brand you have, call us and we'll identify it for you.

How Jim handles a panel repair or replacement:

1. Inspection and straight answer. Jim opens the panel (safely), inspects the breakers, bus, neutral and ground arrangement, and the incoming service conductors, and tells you what he actually sees — repair, replacement, or nothing at all.
2. Clear quote before any work. You get a written quote for the agreed scope before a single breaker is touched. Jim charges what he quoted.
3. Power pulled safely. The service is de-energized and locked so the work is done dead, not live.
4. Repair or replacement. A single breaker swap, a bus repair, or a full panel change-out — done cleanly, with the right torque on every connection and the neutral and grounding bonded correctly.
5. Surge protection (if wanted). A whole-house surge protector can be added at the panel to protect your appliances and electronics from external surges.
6. Inspection and walkthrough. We arrange the city inspection where required, label every breaker clearly, and walk you through the new panel before we leave.

We never quote a price without seeing the job — every home and every panel is different. What follows is an honest explanation of what drives the cost, not a price list. Jim will give you a clear, written quote before any work starts.

• Repair vs. replacement. Swapping one faulty breaker is a different job from a full panel change-out.
• Panel amperage. A like-for-like replacement costs differently from upgrading to a higher-amperage panel (which may also require a service upgrade).
• Condition of the enclosure and wall. A rusted enclosure or damaged backing adds remediation work.
• Circuit count and rework. How many circuits land in the panel, and whether any need to be re-routed or re-terminated, affects labor.
• Surge protection. Adding a whole-house surge protector is an optional add-on at the panel.
• Permitting and inspection. Permit fees and required inspections vary by city.

Financing is available on qualifying work. Ask Jim when you call.

Inland-Marine Electrical Services is based in Joshua, TX and serves a roughly 30-mile radius — including Cleburne, Burleson, and the surrounding Johnson, Tarrant, Ellis, Hood, Parker, Somervell, and Hill county communities. If you're inside that circle and need electrical panel repair & replacement, Jim will come take a look and give you a straight quote.

Take the free 60-second Panel Check. Answer four quick questions and get an honest read right now — no contact info required to see your result.